API 5CT P110
API 5CT P110
API 5CT P110 is a type of steel pipe that is typically used in well construction and the petroleum industry. It is mostly used as casing and tubing for OCTG (oil country tubular goods). API 5CT P110 has a higher collapse resistance due to the addition of vanadium, chromium, and molybdenum. The well owner may use this type of steel pipe to protect their well and increase its longevity. Steel pipes like API 5CT P110 are also used in other industries such as construction or transportation. However, the well-construction industry is the main user of this type of pipe.
Why choose tuspipe?
Since 1998, Tianjin United Steel Pipe Co., Ltd (TUSPIPE) has been committed to supplying high-quality line pipes.
With over 500,000 tons annual production capacity, the company serves various fields and industries, such as oil & gas exploitation and transmission, ship & auto-building, water & electricity, environmental protection, mechanical engineering, infrastructure construction and etc.
TUSPIPE places a premium on product quality and rigorous product quality control. In order to maintain good product quality, the company has established a Test & Inspection Center since 2004. With a series of state-of-the-art tests and inspection equipment, the test & inspection center is able to perform the tensile tests, hydro tests, impact tests, DWTT, etc.
Play Video about Tianjin United Steel Pipe Co., Ltd office building
Product Description of API 5CT P110
| Product Name | API-5CT P110 | |
| Size | O. D | 26.67-508mm |
| W. T | 2.87-16.13mm | |
| Length | R1(5.49-6.71m),R2(8.23-9.14m),R3(11.58-13.72m) | |
| Type of End Finish | 1.Plain end 2.Short round thread 3.Long round thread 4.Buttress thread | |
| Surface | 1.Black Painted 2.With oil 3.Bared or as per customers’ requirement | |
| Standard | API 5CT | |
| Application | Tube for conveying gas, water, and oil in both and natural gas industries etc. | |
Chemical Composition of API 5CT P110
| Grade | Type | C | Mn | Mo | Cr | Ni max. | Cu max. | P max. | S max. | Si max. | ||||
| min. | max. | min. | max. | min. | max. | min. | max. | |||||||
| P110 | – | 0.26 | 0.35 | 0.4 | 0.7 | 0.15 | 0.25 | 0.8 | 1.1 | 0.2 | 0.2 | 0.02 | 0.01 | 0.37 |
| For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. NL = no limit. Elements shown shall be reported in product analysis. | ||||||||||||||
Mechanical Analysis of API 5CT P110
| API 5CT Casing Pipe Standard | API 5CT Casing Pipe Type | API 5CT Casing Pipe Tensile Strength MPa | API 5CT Casing Pipe Yield Strength MPa | Total elongation under load % |
| API SPEC 5CT P110 | – | ≥862 | 758 ~ 965 | 0.6 |
API 5CT P110 Casing and Tubing Specifications
- Specification & Size of API 5CT P110 Tubing
| DN | O. D. | Weight | W. T. | End Processing | |||||||||
| Non-upset coupling-thread | Upset coupling-thread | Steel Grade | |||||||||||
| in | mm | lb./ft. | lb./ft. | in | mm | H40 | J55 | L80 | N80 | C90 | T95 | P110 | |
| 2 3/8 | 2.38 | 60.3 | 4 | – | 0.167 | 4.24 | PU | PN | PN | PN | PN | PN | – |
| 4.6 | 4.7 | 0.19 | 4.83 | PNU | PNU | PNU | PNU | PNU | PNU | PNU | |||
| 5.8 | 5.95 | 0.254 | 6.45 | – | – | PNU | PNU | PNU | PNU | PNU | |||
| 6.6 | – | 0.295 | 7.49 | – | – | P | – | P | P | – | |||
| 7.35 | 7.45 | 0.336 | 8.53 | – | – | PU | – | PU | PU | – | |||
| 2 7/8 | 2.88 | 73 | 6.4 | 6.5 | 0.217 | 5.51 | PNU | PNU | – | – | – | – | – |
| 7.8 | 7.9 | 0.276 | 7.01 | – | – | – | – | – | – | – | |||
| 8.6 | 8.7 | 0.308 | 7.82 | – | – | PLB | PLB | PLBE | – | PLB | |||
| 9.35 | 9.45 | 0.34 | 8.64 | – | – | PLB | PLB | PLBE | – | PLB | |||
| 10.5 | – | 0.392 | 9.96 | – | – | PLB | PLB | PLB | – | PLB | |||
| 11.5 | – | 0.44 | 11.18 | – | – | – | – | PLB | – | 　 | |||
| 3 1/2 | 3.5 | 88.9 | 7.7 | – | 0.216 | 5.49 | PN | PN | PN | PN | PN | PN | – |
| 9.2 | 9.3 | 0.254 | 6.45 | PNU | PNU | PNU | PNU | PNU | PNU | PNU | |||
| 10.2 | – | 0.289 | 7.34 | PN | PN | PN | PN | PN | PN | – | |||
| 12.7 | 12.95 | 0.375 | 9.52 | – | – | PNU | PNU | PNU | PNU | PNU | |||
| 14.3 | – | 0.43 | 10.92 | – | – | P | – | P | P | – | |||
| 15.5 | – | 0.476 | 12.09 | – | – | P | – | P | P | – | |||
| 17 | – | 0.53 | 13.46 | – | – | P | – | P | P | – | |||
| 4 | 4 | 102 | 9.5 | – | 0.226 | 5.74 | PN | PN | PN | PN | PN | PN | – |
| – | 11 | 0.262 | 6.65 | PU | PU | PU | PU | PU | PU | – | |||
| 13.2 | – | 0.33 | 8.38 | – | – | P | – | P | P | – | |||
| 16.1 | – | 0.415 | 10.54 | – | – | P | – | P | P | – | |||
| 18.9 | – | 0.5 | 12.7 | – | – | P | – | P | P | – | |||
| 22.2 | – | 0.61 | 15.49 | – | – | P | – | P | P | – | |||
| 4 1/2 | 4.5 | 114 | 12.6 | 12.75 | 0.271 | 6.88 | PNU | PNU | PNU | PNU | PNU | PNU | – |
| 15.2 | – | 0.337 | 8.56 | – | – | P | – | P | P | – | |||
| 17 | – | 0.38 | 9.65 | – | – | P | – | P | P | – | |||
| 18.9 | – | 0.43 | 10.92 | – | – | P | – | P | P | PLB | |||
| 21.5 | – | 0.5 | 12.7 | – | – | P | – | P | P | PLB | |||
| 23.7 | – | 0.56 | 14.22 | – | – | P | – | P | P | PLB | |||
| 26.1 | – | 0.63 | 16 | – | – | P | – | P | P | PLB | |||
| P——Plain；N—— Non-upset coupling-thread；U—— Upset coupling-thread； L——Integral | |||||||||||||
- Specification & Size of API 5CT P110 Casing
| DN | O. D. | Weight | W. T. | 　 | End Machining Form | |||||||
| 　 | Steel Grade | |||||||||||
| in | mm | lb/ft | kg/m | in | mm | H40 | J55 | L80 | N80 | C90 | P110 | |
| K55 | T95 | |||||||||||
| 4 1/2 | 4.500 | 114.3 | 9.5 | 14.14 | 0.205 | 5.21 | PS | PS | – | – | – | – |
| 10.5 | 15.63 | 0.224 | 5.69 | – | PSB | – | – | – | – | |||
| 11.6 | 17.26 | 0.250 | 6.35 | – | PSLB | PLB | PLB | PLB | PLB | |||
| 13.5 | 20.09 | 0.290 | 7.37 | – | – | PLB | PLB | PLB | PLB | |||
| 15.1 | 22.47 | 0.337 | 9.56 | – | – | – | – | – | PLB | |||
| 5 | 5.000 | 127 | 11.5 | 17.11 | 0.220 | 5.59 | – | PS | – | – | – | – |
| 13 | 19.35 | 0.253 | 6.43 | – | PSLB | – | – | – | – | |||
| 15 | 22.32 | 0.296 | 7.52 | – | PSLB | PLB | PLB | PLBE | PLB | |||
| 18 | 26.79 | 0.362 | 9.19 | – | – | PLB | PLB | PLBE | PLB | |||
| 21.4 | 31.85 | 0.437 | 11.1 | – | – | PLB | PLB | PLB | PLB | |||
| 23.2 | 34.53 | 0.478 | 12.14 | – | – | – | – | PLB | – | |||
| 24.1 | 35.86 | 0.500 | 12.7 | – | – | – | – | PLB | – | |||
| 5 1/2 | 5.500 | 139.7 | 14 | 20.83 | 0.244 | 6.2 | PS | PS | – | – | – | – |
| 15.5 | 23.07 | 0.275 | 6.98 | – | PSLB | – | – | – | – | |||
| 17 | 25.3 | 0.304 | 7.72 | – | PSLB | PLB | PLB | PLBE | PLB | |||
| 20 | 29.76 | 0.361 | 9.17 | – | – | PLB | PLB | PLBE | PLB | |||
| 23 | 34.23 | 0.415 | 10.54 | – | – | PLB | PLB | PLBE | PLB | |||
| 26.8 | 39.88 | 0.500 | 12.7 | – | – | – | – | – | – | |||
| 29.7 | 44.2 | 0.562 | 14.27 | – | – | – | – | – | – | |||
| 32.6 | 48.51 | 0.625 | 15.88 | – | – | – | – | – | – | |||
| 35.3 | 52.53 | 0.687 | 17.45 | – | – | – | – | – | – | |||
| 38 | 56.55 | 0.750 | 19.05 | – | – | – | – | – | – | |||
| 40.5 | 60.27 | 0.812 | 20.62 | – | – | – | – | – | – | |||
| 43.1 | 64.14 | 0.875 | 22.22 | – | – | – | – | – | – | |||
| 6 5/8 | 6.625 | 168.28 | 20 | 29.76 | 0.288 | 7.32 | PS | PSLB | – | – | – | – |
| 24 | 35.72 | 0.352 | 8.94 | – | PSLB | PLB | PLB | PLBE | PLB | |||
| 28 | 41.67 | 0.417 | 10.59 | – | – | PLB | PLB | PLBE | PLB | |||
| 32 | 47.62 | 0.475 | 12.06 | – | – | PLB | PLB | PLBE | PLB | |||
| 7 | 7.000 | 177.8 | 17 | 25.3 | 0.231 | 5.87 | PS | – | – | – | – | – |
| 20 | 29.76 | 0.272 | 6.91 | PS | PS | – | – | – | – | |||
| 23 | 34.23 | 0.317 | 8.05 | – | PSLB | PLB | PLB | PLBE | – | |||
| 26 | 38.69 | 0.362 | 9.19 | – | PSLB | PLB | PLB | PLBE | PLB | |||
| 29 | 43.16 | 0.408 | 10.36 | – | – | PLB | PLB | PLBE | PLB | |||
| 32 | 47.62 | 0.453 | 11.51 | – | – | PLB | PLB | PLBE | PLB | |||
| 35 | 52.09 | 0.498 | 12.65 | – | – | PLB | PLB | PLBE | PLB | |||
| 38 | 56.55 | 0.540 | 13.72 | – | – | PLB | PLB | PLBE | PLB | |||
| 42.7 | 63.54 | 0.625 | 15.88 | – | – | – | – | – | – | |||
| 46.4 | 69.05 | 0.687 | 17.45 | – | – | – | – | – | – | |||
| 50.1 | 74.56 | 0.750 | 19.05 | – | – | – | – | – | – | |||
| 53.6 | 79.77 | 0.812 | 20.62 | – | – | – | – | – | – | |||
| 57.1 | 84.97 | 0.875 | 22.22 | – | – | – | – | – | – | |||
| 7 5/8 | 7.625 | 193.68 | 24 | 35.72 | 0.300 | 7.62 | PS | – | – | – | – | – |
| 26.4 | 39.29 | 0.328 | 8.33 | – | PSLB | PLB | PLB | PLBE | PLB | |||
| 29.7 | 44.2 | 0.375 | 9.52 | – | – | PLB | PLB | PLBE | PLB | |||
| 33.7 | 50.15 | 0.430 | 10.92 | – | – | PLB | PLB | PLBE | PLB | |||
| 39 | 58.05 | 0.500 | 12.7 | – | – | PLB | PLB | PLBE | PLB | |||
| 42.8 | 63.69 | 0.562 | 14.27 | – | – | PLB | PLB | PLB | PLB | |||
| 45.3 | 67.41 | 0.595 | 15.11 | – | – | PLB | PLB | PLB | PLB | |||
| 47.1 | 70.09 | 0.625 | 15.88 | – | – | PLB | PLB | PLB | PLB | |||
| 51.2 | 76.19 | 0.687 | 17.45 | – | – | – | – | – | – | |||
| 55.3 | 80.3 | 0.750 | 19.05 | – | – | – | – | – | – | |||
| 8 5/8 | 8.625 | 219.08 | 24 | 35.72 | 0.264 | 6.71 | – | PS | – | – | – | – |
| 28 | 41.62 | 0.304 | 7.72 | PS | – | – | – | – | – | |||
| 32 | 47.62 | 0.352 | 8.94 | PS | PSLB | – | – | – | – | |||
| 36 | 53.57 | 0.400 | 10.16 | – | PSLB | PLB | PLB | PLBE | PLB | |||
| 40 | 59.53 | 0.450 | 11.43 | – | – | PLB | PLB | PLBE | PLB | |||
| 44 | 65.48 | 0.500 | 12.7 | – | – | PLB | PLB | PLBE | PLB | |||
| 49 | 72.92 | 0.557 | 14.15 | – | – | PLB | PLB | PLBE | PLB | |||
| 9 5/8 | 9.625 | 244.48 | 32.3 | 48.07 | 0.312 | 7.92 | PS | – | – | – | – | – |
| 36 | 53.57 | 0.352 | 8.94 | PS | PSLB | – | – | – | – | |||
| 40 | 59.53 | 0.395 | 10.03 | – | PSLB | PLB | PLB | PLBE | – | |||
| 43.5 | 64.73 | 0.435 | 11.05 | – | – | PLB | PLB | PLBE | PLB | |||
| 47 | 69.94 | 0.472 | 11.99 | – | – | PLB | PLB | PLBE | PLB | |||
| 53.5 | 79.62 | 0.545 | 13.84 | – | – | PLB | PLB | PLBE | PLB | |||
| 58.4 | 86.91 | 0.595 | 15.11 | – | – | PLB | PLB | PLB | PLB | |||
| 59.4 | 88.4 | 0.609 | 15.47 | – | – | – | – | – | – | |||
| 64.9 | 96.58 | 0.672 | 17.07 | – | – | – | – | – | – | |||
| 70.3 | 104.62 | 0.734 | 18.64 | – | – | – | – | – | – | |||
| 75.6 | 112.5 | 0.797 | 20.24 | – | – | – | – | – | – | |||
| 10 3/4 | 10.750 | 273.05 | 32.75 | 48.74 | 0.279 | 7.09 | PS | – | – | – | – | – |
| 40.5 | 60.27 | 0.350 | 8.89 | PS | PSB | – | – | – | – | |||
| 15.5 | 67.71 | 0.400 | 10.16 | – | PSB | – | – | – | – | |||
| 51 | 75.9 | 0.450 | 11.43 | – | PSB | PSB | PSB | PSBE | PSB | |||
| 55.5 | 82.59 | 0.495 | 12.57 | – | – | PSB | PSB | PSBE | PSB | |||
| 60.7 | 90.33 | 0.545 | 13.84 | – | – | – | – | PSBE | PSB | |||
| 65.7 | 97.77 | 0.595 | 15.11 | – | – | – | – | PSB | PSB | |||
| 73.2 | 108.93 | 0.672 | 17.07 | – | – | – | – | – | – | |||
| 79.2 | 117.86 | 0.734 | 18.64 | – | – | – | – | – | – | |||
| 85.3 | 126.94 | 0.797 | 20.24 | – | – | – | – | – | – | |||
| 11 3/4 | 11.750 | 　 | 42 | 62.5 | 0.333 | 8.46 | PS | – | – | – | – | – |
| 47 | 69.94 | 0.375 | 20.24 | – | – | – | – | – | – | |||
| 54 | 80.36 | 0.435 | 8.46 | – | – | – | – | – | – | |||
| 60 | 89.29 | 0.489 | 9.53 | – | – | – | – | – | – | |||
| 65 | 96.73 | 0.534 | 11.05 | – | – | – | – | – | – | |||
| 71 | 105.66 | 0.582 | 14.42 | – | – | – | – | – | – | |||
| 13 3/8 | 13.375 | 339.73 | 48 | 71.43 | 0.330 | 8.38 | PS | – | – | – | – | – |
| 54.5 | 81.1 | 0.380 | 9.65 | – | PSB | – | – | – | – | |||
| 61 | 90.78 | 0.430 | 10.92 | – | PSB | – | – | – | – | |||
| 68 | 101.19 | 0.480 | 12.19 | – | PSB | PSB | PSB | PSB | PSB | |||
| 72 | 107.15 | 0.514 | 13.06 | – | – | PSB | PSB | PSB | PSB | |||
| 16 | 16.000 | 406.4 | 65 | 96.73 | 0.375 | 9.53 | PS | – | – | – | – | – |
| 75 | 111.61 | 0.438 | 11.13 | – | PSB | – | – | – | – | |||
| 84 | 125.01 | 0.495 | 12.57 | – | PSB | – | – | – | – | |||
| 109 | 162.21 | 0.656 | 16.66 | – | P | P | P | – | P | |||
| 18 5/8 | 18.625 | 473.08 | 87.5 | 130.21 | 0.435 | 11.05 | PS | PSB | – | – | – | – |
| 20 | 20.000 | 508 | 94 | 139.89 | 0.438 | 11.13 | PSL | PSLB | – | – | – | – |
| 106.5 | 158.49 | 0.500 | 12.7 | – | PSLB | – | – | – | – | |||
| 133 | 197.93 | 0.635 | 16.13 | – | PSLB | – | – | – | – | |||
| P——Plain；S——Short-thread；L——Long-thread；B——Buttress thread；E——Extreme thread | ||||||||||||
