AS1163 is the Australian/New Zealand Standard for Cold-formed structural steel hollow sections. This Standard specifies the requirements for the production and supply of cold-formed, electric resistance-welded, steel hollow sections used for structural purposes. It considers three strength grades, with or without impact properties, that are suitable for welding. This Standard applies to structural hollow sections formed cold without subsequent heat treatment. The purpose of AS1163 standard is to provide manufacturers and suppliers with a uniform method of specifying the requirements for the production of cold-formed, electric resistance-welded, steel hollow sections. The dimensions, tolerances, and other relevant properties specified in this Standard are those appropriate to current manufacturing capabilities and practices. This Standard is not intended to convert non-compliant steels into grades that meet the requirements of this Standard. However, nothing in this Standard shall be taken to prohibit the use of lower grades of material than those specified if such use can be shown to be consistent with good engineering practice. In particular, nothing in AS1163 standard precludes the formation of cubic or non-circular shapes from material complying with the dimensional tolerances specified herein by methods.
Why choose tuspipe?
Since 1998, Tianjin United Steel Pipe Co., Ltd (TUSPIPE) has been committed to supplying high-quality line pipes.
With over 500,000 tons annual production capacity, the company serves various fields and industries, such as oil & gas exploitation and transmission, ship & auto-building, water & electricity, environmental protection, mechanical engineering, infrastructure construction and etc.
TUSPIPE places a premium on product quality and rigorous product quality control. In order to maintain good product quality, the company has established a Test & Inspection Center since 2004. With a series of state-of-the-art tests and inspection equipment, the test & inspection center is able to perform the tensile tests, hydro tests, impact tests, DWTT, etc.
Dimensions and Sizes of AS1163 Round Pipes
Steel Grades of AS/NZS 1163 Pipes
The grade designation (for example, C250) is based on the steel’s nominal minimum yield strength (in MPa). To indicate that the section is cold-formed, the prefix ‘C’ is used before the value of the nominal yield strength of the steel. AS1163 only takes into account cold-formed structural steel hollow sections. As specified in AS1163, the suffix ‘L0’ denotes impact properties at 0°C.
Chemical Composition of AS1163 Materials
As per the AS1163 standard, sampling methods for chemical analysis must be in accordance with AS/NZS 1050.1 or ISO 14284. This is to ensure that the results of the analysis are accurate. The accuracy of the results is essential in order to make decisions about the quality of the product. AS/NZS 1050 series Standards or other procedures that achieve the same, or better, degree of accuracy must be used in order to determine the chemical composition. This is because it is important to have reliable information about the chemical composition in order to make decisions about the safety and quality of the product.
Mechanical Properties of AS1163 Materials
Tensile tests, impact tests, and flattening tests are very important when measuring the mechanical properties of AS1163 materials. These tests help determine the material’s ability to resist forces that can cause it to break or deform. The tensile test measures a material’s ability to withstand pulling forces, while the impact test measures its resistance to shattering forces. The flattening test, meanwhile, assesses a material’s ability to resist crushing forces. Each of these tests is essential for understanding the overall strength and durability of AS1163 materials. By assessing the results of these tests, engineers can ensure that these materials will be able to perform as intended in a variety of applications.
Tensile testing is an essential process for determining the strength and properties of materials. In order to ensure accurate results, it is important to follow the guidelines set out in AS 1391. This standard specifies the rate of straining that should be used when approaching the yield strength, as well as the limits for the conventional straining rate. In addition, the impact test specified in AS 1544.2 must be carried out on each of the three test pieces prepared from each sample. These tests are essential for ensuring the safety and quality of materials.
- AS1163 Tensile Test Requirements
- AS1163 Charpy V-Notch Impact Test Requirements
The tolerances of AS1163 Standard
The tables given below show the dimensional and mass tolerances for AS1163 cold-formed hollow sections. The first table is for shape and mass, while the second is for length. As can be seen, the tolerances are relatively tight, especially for mass. This is due to the fact that hollow sections are often used in load-bearing applications, and even small deviations from the nominal dimensions can lead to significant changes in performance. As a result, it is important to ensure that cold-formed hollow sections meet the tolerances given in the tables below. Doing so will help to ensure that they perform as intended and do not fail prematurely.
- AS1163 Tolerance for Shape and Mass
- AS1163 Tolerance on Length
How to Find A Reliable AS/NZS 1163 Pipe Mill in China?
When purchasing steel pipes that meet the AS1163 and API 5L dual standards, it is important to be aware of the fake certificates that some companies use. These fake certificates are often created using photoshop and can be very difficult to identify. However, they can often trick buyers into thinking they are getting a high-quality product when in reality the product is of low quality and may even be dangerous. This damages the projects that use these pipes because they are not up to code and they can cause safety issues. If something goes wrong, the company that chose the supplier with a fake certificate can be sued and lose a lot of money in compensation payments. To avoid this, it is essential to do your research and only purchase pipes from a trusted supplier. With so much at stake, it is simply not worth taking the risk of using a fake certificate.
1. Check the API Composite List
The American Petroleum Institute (API) is a trade association that represents the oil and gas industry. API certification is a voluntary process that shows that a company meets the API’s standards for quality and safety. The API Composite List is a directory of all the companies that are certified by the API. This list can be used to check if a company is authorized to use the API logo on its products. To search the Composite List,
1) Open the API official website and look for the “API Composite List” tab;
2) Find the screenshot above, search company name or authorized number, and click “Search”;
3) Check the detail of the company regarding the authorization types and the authorization status.
If you are looking for a certain type of certification, and the certificate status shows “Active”, then you can be sure that you are safe at this stage. You may also be interested in checking the company details to see if you are dealing with the right person. To do this, simply click on the company name shown in red. This will take you to the company’s page where you can find more information about them. Once you have verified that the company is legitimate, you can move on to the next stage of your research.
2. Check the Non-Licensee / Registrant List
The American Petroleum Institute (API) strives to maintain the highest standards in the industry and to ensure that only qualified suppliers are providing products and services to its members. As part of this commitment, API maintains a Non-Licensee/Registrant List of companies who are supplying with fake certificates or otherwise operating outside of the requirements set forth by API. The list is updated regularly, and companies that appear on the list should be avoided.
1) Simply visit the API official website and select the “Non-Licensee/Registrant List” option from the drop-down menu;
2) Scroll down to find out which companies are dealing with fake licenses.
This information can be used to down your search for a qualified pipe supplier. If you are looking for a certain company, you can enter its name in the “Search” field.
3. Check the MTC from the Supplier
1) The company name – as you can see in the above picture, the name is very similar to our company name, but they are absolutely different. The company names are always same with that on the certificates. Even an abbreviation is not a reasonable explanation.
2) As we all know that CNAS is an agency that analyzes whether or not a laboratory may be accredited by China’s National Accredited Testing Laboratory. It has bilateral or multilateral accrediting cooperation agreements with important international accreditation agencies. And, a qualified AS1163 steel pipe mill has to obtain the CNAS certificate first before producing and selling to Australia and New Zealand markets. So we will check the CNAS registration number on the MTC. First, visit the CNAS official website; Next, click on “Find an Accredited Body“; Then, click on “Testing & Calibration Laboratories“, and type in the registration number or the company name; Finally, you can check if the registration number and company name are matched to the MTC you have;
3) Finally, the API certification number – Usually, a steel pipe mill that is holding the API certification would show the certification numbers on the MTC. While there is none of it on the sample MTC above.