TUSPIPE-LOGO-TIANJIN-UNITED-STEEL-PIPE-CO.,-LTD

P265TR1

EN-10217-P195TR1-P195TR2-P235TR1​-P235TR2-P265TR1​-P265TR2-Steel-Pipes

EN10217 P265TR1

EN10217-1 P265TR1 steel pipe grade is a welded steel tube for pressure purposes in the technical delivery condition specified in the European Standard. This European Standard applies to welded circular tubes made of non-alloy and alloy steels with specified elevated temperature properties. The name of this pipe refers to its minimum yield strength in MPa stressful during manufacture. This welded steel pipe has good weldability and is suitable for different welding processes, such as fusion welding and resistance welding. This carbon steel pipe is mostly used in boilers, heat exchangers, and other high-temperature equipment and pipelines. According to the technical requirements of different standards, it can also be used in ships, vehicles, bridges, construction and etc. EN10217-1 P265TR1 steel pipe grade is an ideal choice for conveying fluid, such as water, gas, oil and etc. Thanks to its good mechanical property and technology performance, it can be widely used in many industries.

Why choose tuspipe?

pipe-icon

Since 1998, Tianjin United Steel Pipe Co., Ltd (TUSPIPE) has been committed to supplying high-quality line pipes.

With over 500,000 tons annual production capacity, the company serves various fields and industries, such as oil & gas exploitation and transmission, ship & auto-building, water & electricity, environmental protection, mechanical engineering, infrastructure construction and etc.

TUSPIPE places a premium on product quality and rigorous product quality control. In order to maintain good product quality,  the company has established a Test & Inspection Center since 2004. With a series of state-of-the-art tests and inspection equipment, the test & inspection center is able to perform the tensile tests, hydro tests, impact tests, DWTT, etc.

Play Video about Tianjin United Steel Pipe Co., Ltd office building

EN10217 P265TR1 Welding Steel Name Designated

  • P265TR1 the capital letter P for pressure purposes;
  • P265TR1 the required minimum yield strength for thicknesses less than or equal to 16mm;
  • TR1 the alphanumeric code for qualities without defined aluminum content, impact characteristics, or special inspection and testing criteria.

Appearance of EN 10217-1 P265TR1 Pipes

- Weld Seam

The quality of a welding joint is crucial in the manufacturing of EN 10217-1 pipes. Any cracks, lack of fusion, or lack of penetration in the weld area can cause the pipe to fail, potentially leading to injuries or property damage. For this reason, strict quality control measures are in place to ensure that all welds meet the highest standards. In particular, repairs to the weld seam are not permitted unless they are carried out in accordance with an agreed documented procedure. This ensures that all repaired welds meet the required strength and integrity standards, ensuring the safety of both users and property.

- Tube Surface

The surface requirements mentioned in the standard apply to all types of welded or seamless pipes. These pipes shall be free from any kind of external or internal surface imperfections that can be detected by visual examination. The surface condition should be such that any surface imperfections requiring dressing can be identified easily. Dressing, in this context, means grinding or machining the surface to make it smooth. It is permissible to dress only those surface imperfections and after dressing, the wall thickness is not less than the minimum specified wall thickness. Also, all dressed areas should blend smoothly into the contour of the pipe so that there is no indentation or bulging. Any surface imperfection which is deeper than 5% of specified wall thickness T or 3mm, whichever is smaller, shall be dressed accordingly. 

Mechanical Properties of EN10217 P265TR1 Materials

Steel GradeYield Strength ReH
for T wall thickness in mm (Mpa)
Tensile
strength Rm
Elongation at breakage A % min.
T ≤1616<T≤ .40(Mpa)LongitudinalTransversal
P265TR1265255410-5702119

Chemical Composition of EN10217 P265TR1 Materials

Steel GradeChemical Composition in % in mass.
Max C %Max Si %Max Mn %Max P %Max S %Max Cr %
P265TR10,2000,4001,4000,0250,0200,30

Test Frequency of P265TR1 Pipes

Number of Tubes per Test Unit
Outside diameter (mm)Maximum number of tubes per test unit
DQuality TR1
D≤114.3400
114.3<D≤323.9200
323.9<D≤660100
D>66050

Maximum Height of the Weld Seam for SAW EN10217 P265TR1 Tubes

Wall thickness TMaximum height of the weld seam (mm)
InsideOutside
T≤12.53.53.5
T>12.54.84.8

EN10217 P265TR1 Minimum Thickness Specified (1)

NPSOutside Diameter
(mm)
Wall Thickness
(mm)
Tolerances on the outside
diameter (mm)
Mass per unit of length (Kg/m)
Max.Min.
1”33,72,3034,033,41.78
1.25”42,42,3042,742,12,27
1.5”48,32,3048,648,02,61
2”60,32,3060,660,03.29
2.5”76,12.6076,475,84.71
3”88,92.9089,288,66,15
4”114,33,20114,6114,08.77
5”139,73.60140,0139,412.1
6”168,14,00168,7167,916.21
8”219,15,00219,5218,726.4
10’273.15.00275.15271.0533.1
12’323.95.60326.33321.4743.97

EN10217 P265TR1 Minimum Thickness Specified (2)

NPSOutside
Diameter (mm)
Minimum Wall
Thickness (mm) with Standard
Tolerance
Tolerances on the outside diameter (mm)Mass per unit of length (Kg/m)
Max.Min.
1”33,72,6034,033,41,99
1.25”42,42,6042,742,12,55
1.5”48,32,6048,648,02,93
2”60,32,6060,660,03,70
2.5”76,12.676,475,84.71
3”88,92.989,288,66,15
4”114,33,20114,6114,08.77
5”139,73.6140,0139,412.1
6”168,14,00168,7167,916.21
8”219,14,50219,5218,723,82
10’273.15275.15271.0533.1
12’323.95.6326.33321.4743.97

EN10217 P265TR1 Length Tolerance

Length L (mm)Tolerance (mm) for outside diameter <406,4 mm
L < 60000/+10
6000 < L < 120000/+15

Marking to be Applied on P265TR1 Pipes

Manufacturers of steel tubes must mark their product in a way that is visible and legible, in order to conform to EN 10217-1. This standard dictates that at least one end of each tube be marked with the manufacturer’s name or trade mark, the type of tube, the standard number, and the steel name or steel number. If the outside diameter of the tube is over 51mm, then this information may be replaced by a label or tag which is securely attached to the bundle or box containing the tubes. This label or tag must also identify the tube diameter, wall thickness and length range. Automated link marking, paint stenciling, hard stamping (using low stress or pin stamps), or a combination of these methods may be used so long as the information required by EN 10217-1 is visible and legible.

show various kind of galvanized pipes
Galvanized Pipe
PIPE-COATING
Pipe Coating
Boiler-Pipe
Boiler Tube
pipe-fittings
Pipe Fittings
Scroll to Top

Get A Quote Now

Fill in the form below and our team will be happy to assist you